CX-Series

CX-100 Half Rack

CX-200 Double Rack

CX-300 cage Rack

CX-220 Double half Rack

CX-400 cage and a half Rack

The Wright Equipment CX Series is a modular rack that uses the proven pin and twist method for its accessories. We use our laser cutting technology to cut numbered holes in the uprights to make accessory placement easier. This is a simple rack and therefore very cost effective for you, the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. The CX series comes standard with a customized laser cut header and weight peg storage with hardened plastic coated sleeves. The plastic will keep you from scratching up those pegs and keep them looking good and black for the life of the rack.  

The CX-100 Half Rack is a great option for tight quarters or smaller rooms. We are able to place these up against a wall and also bridge them together if you choose to do so. Customize a drop-down header and even a header on a bridge.

There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8' wide and 6' or 4' deep. Bench, bar, and plates are not included in the price.

 

SPECS

  • Brand : Wright Equipment
  • Use : Squat/Bench/PullUp/Power Lifting
  • Weight : 435lbs
  • Upright : 11ga 3"x3" tube / Laser Cut #s
  • Material : Steel
  • Coating : Custom Powder
  • Height : 105"
  • Width : Base 48" / 56" Including Weight Storage
  • Length : 60"
  • Assembly : Bolt
  • Warranty : Lifetime* Welds/Structure
  • Made in USA: Yes
  • Options : Platform, Dip Station, Landmine

 

The Wright Equipment CX Series is a modular rack that uses the proven pin and twist method for its accessories. We use our laser cutting technology to cut numbered holes in the uprights to make accessory placement easier. This is a simple rack and therefore very cost effective for you, the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. The CX series comes standard with a customized laser cut header and weight peg storage with hardened plastic coated sleeves. The plastic will keep you from scratching up those pegs and keep them looking good and black for the life of the rack.  

The CX-200 double rack is a great option for larger rooms with the space in the middle of your weight room. This option allows you to have 2 stations in one rack. You can bridge them together if you choose to do so. Customize a drop-down header and even a header on a bridge.

There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8' wide and 6' or 4' deep. Bench, bar, and plates are not included in the price.

 

SPECS

  • Brand : Wright Equipment
  • Use : Squat/Bench/PullUp/Power Lifting
  • Weight : 750lbs
  • Upright : 11ga 3"x3" tube / Laser Cut #s
  • Material : Steel
  • Coating : Custom Powder
  • Height : 105"
  • Width : Base 48" / 56" Including Weight Storage
  • Length : 96"
  • Assembly : Bolt
  • Warranty : Lifetime* Welds/Structure
  • Made in USA: Yes
  • Options : Platform, Dip Station, Landmine

The Wright Equipment CX Series is a modular rack that uses the proven pin and twist method for its accessories. We use our laser cutting technology to cut numbered holes in the uprights on all four sides that will give your athletes an easy visual to allow for quick adjustments from lift to lift. This is a simple rack and therefore very cost effective for you, the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. The CX series comes standard with a customized laser cut header and weight peg storage with hardened plastic-coated sleeves. The plastic will keep you from scratching up those pegs and keep them looking good and black for the life of the rack.  

The CX-300 Cage rack is a full power rack that gives you a bigger footprint for stability. The standard Shackle and Strap gives you many options as well. A safer way to do your bench lifts or squats while relying on a 20 ton tested Strap. You can bridge them together if you choose to do so. Customize a drop-down header and even a header on a bridge.

There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8' wide and 6' or 4' deep. Bench, bar, and plates are not included in the price.

 

SPECS

  • Brand : Wright Equipment
  • Use : Squat/Bench/PullUp/Power Lifting
  • Weight : 635lbs
  • Upright : 11ga 3"x3" tube with Laser cut #s
  • Material : Steel
  • Overlay : NO
  • Coating : Custom Powder
  • Height : 96"
  • Width : Base 48" / 56" Including Weight Storage
  • Length : 72"
  • Assembly : Bolt
  • Warranty : Lifetime* Welds/Structure
  • Made in USA: Yes
  • Options : Platform, Dip Station, Landmine

The Wright Equipment CX Series is a modular rack that uses the proven pin and twist method for its accessories. We use our laser cutting technology to cut numbered holes in the uprights on all four sides that will give your athletes an easy visual to allow for quick adjustments from lift to lift. This is a simple rack and therefore very cost effective for you, the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. The CX series comes standard with a customized laser cut header and weight peg storage with hardened plastic-coated sleeves. The plastic will keep you from scratching up those pegs and keep them looking good and black for the life of the rack.  

The CX-220 Double Half Rack is like the double rack but gives you twice the amount of storage as the double rack. Featuring two storage uprights for weight pegs or any other accessory. This rack is great for large rooms and accommodates two workstations. You can bridge them together if you choose to do so. Customize a drop-down header and even a header on a bridge.

There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8' wide and 6' or 4' deep. Bench, bar, and plates are not included in the price.

 

SPECS

  • Brand : Wright Equipment
  • Use : Squat/Bench/PullUp/Power Lifting
  • Weight : 850lbs
  • Upright : 11ga 3"x3" tube with Laser cut #s
  • Material : Steel
  • Overlay : NO
  • Coating : Custom Powder
  • Height : 120’’
  • Width : Base 48" / 56" Including Weight Storage
  • Length : 110"
  • Assembly : Bolt
  • Warranty : Lifetime* Welds/Structure
  • Made in USA: Yes
  • Options : Platform, Dip Station, Landmine

The Wright Equipment CX Series is a modular rack that uses the proven pin and twist method for its accessories. We use our laser cutting technology to cut numbered holes in the uprights on all four sides that will give your athletes an easy visual to allow for quick adjustments from lift to lift. This is a simple rack and therefore very cost effective for you, the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. The CX series comes standard with a customized laser cut header and weight peg storage with hardened plastic-coated sleeves. The plastic will keep you from scratching up those pegs and keep them looking good and black for the life of the rack.  

The CX-400 double power rack is a CX-100 and CX-300 put together to create a power rack like no other. This rack gives you two workstations. One, cage station and one, half rack station. This rack is great for large rooms. You can bridge them together if you choose to do so. Customize a drop-down header and even a header on a bridge.

There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8' wide and 6' or 4' deep. Bench, bar, and plates are not included in the price.

 

SPECS

  • Brand : Wright Equipment
  • Use : Squat/Bench/PullUp/Power Lifting
  • Weight : 850lbs
  • Upright : 11ga 3"x3" tube with Laser cut #s
  • Material : Steel
  • Overlay : NO
  • Coating : Custom Powder
  • Height : 96’’
  • Width : Base 48" / 56" Including Weight Storage
  • Length : 110"
  • Assembly : Bolt
  • Warranty : Lifetime* Welds/Structure
  • Made in USA: Yes
  • Options : Platform, Dip Station, Landmine

 

Options and attachments